* Note: A regulator equipped with a flow gauge is not accurate when a back pressure in excess of 2 PSIG exists at the outlet. Back pressure is caused by a restriction in the apparatus downsteam of the flow gauge. Metering valves, kinked hoses or even very long hoses are restrictions that can cause back pressure. In applications where back pressure in excess of 2 PSIG can be expected, a regulator equipped with a flowmeter should be used.
Outlet Connection: 5/8" - 18(F) RH, CGA 032.
Copyright 2005-2013 DYNAWELD LTD. All Rights Reserved.