Dynaweld Limited

 Model: K2000
              Light Duty
Accepts:
   Pointed Carbons: 1/8" (3mm) to 1/4" (6mm)
   Flat Carbons: 3/8" (10mm)
Maximum 450 Amp
Compressed air:
   Pressure:  40 psi (2.8 kg/cm²)
   Flow Rate: 8 cfm (0.23 m³/min)
Cable Length: 7ft, 10ft

Model: K3000
             Medium Duty
Accepts:
   Pointed Carbons: 1/8" (3mm) to 3/8" (10mm)
   Flat Carbons: 3/8" (10mm) & 5/8"(16mm)
Maximum 600 Amp
Compressed air:
   Pressure: 80 psi (5.6 kg/cm²)
   Flow Rate: 21 cfm (0.6 m³/min)
Cable Length: 7ft, 10ft

Model: K4000
             Heavy Duty
Accepts:
Pointed Carbons: 5/32" (4mm) to 1/2" (13mm)
   Flat Carbons: 3/8" (10mm) & 5/8"(16mm)
   Maximum 1000 Amp
Compressed air:
   Pressure: 80 psi (5.6 kg/cm²)
   Flow Rate: 28 cfm (0.79 m³/min)
Cable Length: 7ft, 10ft

Model: K-3
             Medium Duty
Accepts:
   Pointed Carbons: 1/8/" (3mm) to 3/8" (10mm)
   Flat Carbons: 3/8" (10mm) & 5/8" (16mm)
Maximum 600 Amp
Compressed air:
   Pressure: 80 psi (5.6 kg/cm²)
   Flow Rate: 21 cfm (0.60m³/min)
Cable Length: 7ft, 10ft

Model: K-5
             Extra Heavy Duty
Accepts:
   Pointed Carbons: 5/32" (4mm) to 5/8" (16mm)
   Flat Carbons: 3/8" (10mm) & 5/8" (16mm)
Maximum 1250 Amp
Compressed air:
   Pressure: 80 psi (5.6 kg/cm²)
   Flow Rate: 30 cfm (0.85 m³/min)
Cable Length: 7ft, 10ft

Model: Tri-Arc                Defect Removal Heads Accepts:    Pointed Carbons or Jointed Carbons: 5/16" (6mm) to 3/4" (20mm) Maximum  2200 Amp Compressed air:    Pressure: 80 psi (5.6kg/cm2)    Flow Rate: 36 cfm (1m3/min) Cable Length: 7ft

Model: Tri-Arc               Padwashing Heads Accepts:    Pointed Carbons or Jointed Carbons: 1/2" (13mm) to 1" (25mm) Maximum 2200 Amp Compressed air:    Pressure: 80 psi (5.6kg/cm2)    Flow Rate: 37 cfm (1m3/min) Cable Length: 7ft

Model: Tri-Arc                 General Purpose Cleaning Heads Accepts:     Pointed Carbons or Jointed Carbons: 5/16" (6mm) to 3/4" (20mm) Maximum 2200 Amp Compressed air:    Pressure: 80 psi (5.6kg/cm2)    Flow Rate: 40 cfm (1.1m3/min) Cable Length: 7ft